Full Metadata -
View Attributes -
-  none available  -
Get Data -


2007 Rice County, MN Digital Orthophotography and LiDAR collect supporting 2' contours

This page last updated: 03/03/2008
none available


Metadata Summary

Originator Aero-Metric, Inc. (Maple Grove, MN)
Abstract County-wide LiDAR (Light Detection And Ranging) DSM (digital surface model) data collection enhanced with hydrological breaklines and other enhancements where necessary via photogrammetric methods (stereo compiled) to derive a DTM (digital terrain model) accurate enough to support 2.0' contours along with Black and White Digital Orthophotography at a 0.5' resolution.
Browse Graphic none available
Time Period of Content Date 04/18/2007
Currentness Reference April 18 imagery capture
April 18, 19 & 27 LiDAR collect
Access Constraints Contact the Rice County GIS Manager.
Use Constraints Contact the Rice County GIS Manager.
Distributor Organization Rice Co. GIS
Ordering Instructions
Online Linkage none available


Full Metadata
2007 Rice County, MN Digital Orthophotography and LiDAR collect supporting 2' contours

Go to Section:
1. Identification Information
2. Data Quality Information
3. Spatial Data Organization Information
4. Spatial Reference Information
5. Entity and Attribute Information
6. Distribution Information
7. Metadata Reference Information

none available
 
Section 1 Identification Information   Top of page
Originator Aero-Metric, Inc. (Maple Grove, MN)
Title 2007 Rice County, MN Digital Orthophotography and LiDAR collect supporting 2' contours
Abstract County-wide LiDAR (Light Detection And Ranging) DSM (digital surface model) data collection enhanced with hydrological breaklines and other enhancements where necessary via photogrammetric methods (stereo compiled) to derive a DTM (digital terrain model) accurate enough to support 2.0' contours along with Black and White Digital Orthophotography at a 0.5' resolution.
Purpose GIS base mapping, planning, taxation, flood plain management, land use planning, emergency management, FEMA Flood Hazard Mapping, etc.
Time Period of Content Date 04/18/2007
Currentness Reference April 18 imagery capture
April 18, 19 & 27 LiDAR collect
Progress Complete
Maintenance and Update Frequency Unknown
Spatial Extent of Data All of Rice County, MN in it's entirety (approx. 516 sq. miles)
Bounding Coordinates -93.5272
-93.0373
44.5453
44.1948
Place Keywords Minnesota, Rice County, Faribault, Northfield, Dundas
Theme Keywords LiDAR, DEM, DSM, DTM, contours, photogrammetry, photogrammetric, digital orthophoto, orthophoto, ortho, imagery, aerial photography, images, GIS, FEMA
Theme Keyword Thesaurus
Access Constraints Contact the Rice County GIS Manager.
Use Constraints Contact the Rice County GIS Manager.
Contact Person Information Michelle Trager, GIS Planner
Rice County Information Technology
Government Services Building, 320 3rd St. NW, Suite 8
Faribault, Minnesota 55021
Phone: 507-333-3777
FAX: 507-332-5967
E-mail: mtrager@co.rice.mn.us
Browse Graphic none available
Browse Graphic File Description
Associated Data Sets 2007 LiDAR DTM, 2' Contours, Black and White Digital Orthophotos, Rice County, MN

 
Section 2 Data Quality Information Top of full metadata Top of page
Attribute Accuracy N/A
Logical Consistency N/A
Completeness All of Rice County, MN
Horizontal Positional Accuracy TBD by Mn/DOT at a later date.
Vertical Positional Accuracy TBD by Mn/DOT at a later date.
Lineage County was flown with two Z/I Digital Mapping Cameras (DMC) at 5,000' Above Mean Terrain on April 18, 2007. The imagery was used to photogrammetrically enhance the hydrographic breakline features, to final QC the LiDAR data set, and to produce Black and White 0.5' digital orthophotos by rectifying the imagery to the LiDAR Bare Earth data set. The orthophotos were tiled by PLSS quarter section format with varying overlap. Airborne GPS was acquired and processed to control every image center. Thirty-seven ground control positions were targeted by Rice County with Mn/DOT's assistance. Soft-copy aero-triangulation results of the Airborne GPS and 37 control points were verified with ten additional withheld target positions set throughout the County and coordinates were submitted to Mn/DOT for check point assesment. Upon accuracy assessment verification, the actual ground coordinates of these 10 positions were then inserted and held to in the final A/T solution.

A LiDAR data set acquisition took place on April 18 & 19, 2007 with an Optech 3100 LiDAR Unit. A final DTM data set was comprised of the bare earth data set gridded out at a 3' posting and enhanced with hyrdographic breaklines, other miscellaneous breaklines and manually placed points via photogrammetric methods in areas where LiDAR data failed to reach bare earth. This final DTM was used to rectify the digital orthophotos and to generate continuous (unclipped and unbroken) 2' contours across the entire County. Final delivery of the LiDAR DTM was in ASCII, LAS, DWG and Shape File formats. Final delivery of the continuous 2' contours was in DWG and Shape File formats.
Source Scale Denominator 1200
 
Section 3 Spatial Data Organization Information Top of full metadata Top of page
Native Data Set Environment TIFF image file format with associated TIFF World Registration file. MrSID compressed image file format with associated SID World Registration file. DTM in ASCII, LAS, DWG and Shape Files. Contours in DWG and Shape Files.
Geographic Reference for Tabular Data N/A
Spatial Object Type Raster
Vendor Specific Object Types N/A
Tiling Scheme PLSS with 1/4 section image overlap
 
Section 4 Spatial Reference Information Top of full metadata Top of page
Horizontal Coordinate Scheme County Coordinates
Ellipsoid GRS80
Horizontal Datum NAD83 (96)
Horizontal Units Feet
Distance Resolution Imagery - 0.5'
Altitude Datum NAVD88
Altitude Units Feet
Depth Datum Mean sea level
Depth Units Feet
Cell Width 0.5
Cell Height 0.5
County Coordinate Zone Identifier 57
Coordinate Offsets or Adjustments none
Map Projection Name Rice Co. coordinates
 
Section 5 Entity and Attribute Information Top of full metadata Top of page
Entity and Attribute Overview
Entity and Attribute Detailed Citation
 
Section 6 Distribution Information Top of full metadata Top of page
Publisher Rice Co. GIS
Publication Date
Contact Person Information Michelle Trager
GIS Coordinator
Rice Co. GIS
320 3rd St. NW, Suite 8
Faribault, MN 55021
Phone: 507-333-3777
FAX: 507-332-5967
E-mail: mtrager@co.rice.mn.us
Distributor's Data Set Identifier
Distribution Liability
Transfer Format Name
Transfer Format Version Number
Transfer Size
Ordering Instructions
Online Linkage none available
 
Section 7 Metadata Reference Information Top of full metadata Top of page
Metadata Date 03/03/2008
Contact Person Information Michelle Trager, GIS Coordinator
Rice Co. GIS
320 3rd St. NW, Suite 8
Faribault, MN 55021
Phone: 507-333-3777
FAX: 507-332-5967
E-mail: mtrager@co.rice.mn.us
Metadata Standard Name
Metadata Standard Version
Metadata Standard Online Linkage



This page last updated: 03/03/2008 back to top